Tray Packers and Display Packs

« Back

TRAY PACKERS AND DISPLAY PACKS

The Tray Packers and Display Packs machine family consists of automatic forming, filling, and sealing equipment; starting from flat blanks for cartons, trays, displays, and sleeves. These machines are available in two different technologies:

  1. Form and fill—TP series
  2. Wrap-around—DP Series

Features of the Tray Packers and Display Packs include:

  • Fully electronic
  • Large capacity
  • Tilted carton magazine
  • Compact footprint
  • Capability of handling irregular shaped products (both in the vertical and horizontal position)

-

DP25

The DP25 is a monoblock wrap around cartoner suitable to form, fill, and close cartons. This machine has a remarkably small footprint compared to its speed. The DP25 is constructed with the following main components and features:

  • Double infeed system
  • Continuous guide of the product to prevent damages
  • Layer configuration driven by linear servomotors with direct activation
  • Single layer checking system
  • Top and bottom controlled stratification
  • Multiple movements with single activation
  • Open flaps check system
  • Flawed cartons reject
  • Outfeed elevator
  • Easy to clean with the balcony design structure
  • Complete separation of the mechanical components to handle potentially corrosive products
  • Integrated electric enclosure
  • Product bypass in the infeed system

TECHNICAL DATA:

  • Maximum Flat Blank: 225 X 325 mm
  • Speed: 20 boxes/minute
  • Gross Weight: 2,200 Kg
  • Compressed Air: 50 Nl/min at 6 bar
  • Installed Power: 18.5 Kw (DP25) + 9.6 Kw (Hot Melt Group)

  • Cartons
  • Doypacks
  • Pouches
  • Tubs
  • Cans
  • Tins
  • Tubes
  • Bags
  • Coffee capsules
  • Stock cubes
  • Tabs
  • Stick packs
  • DP60

    The DP60 is a monoblock wrap around display/tray packer suitable to form, fill, and close cartons, displays/trays, and sleeves. The machine is constructed with the following main components and features:

    • Small and compact footprint
    • Inclined magazine able to accommodate up to four (4) flat blanks
    • Picking system with articulated arm
    • Lateral side flap gluing with hot melt injection device
    • Product insertion inside the forming tool (onto the blank)
    • Forming unit
    • Top flap gluing with hot melt injection device
    • Lid module
    • Closing station
    • Reject station

    TECHNICAL DATA:

    • Maximum Flat Blank: 700 x 700 mm
    • Speed: Up to 160 cpm
    • Gross Weight: 9,000 kg
    • Compressed Air: 2,000 Nl/min
    • Installed Power: 18 Kw

  • Cartons
  • Doypacks
  • Pouches
  • Tubs
  • Cans
  • Tins
  • Tubes
  • Bags
  • Coffee capsules
  • Stock cubes
  • Tabs
  • Stick packs
  • TP40

    The TP40 is a monoblock “form & fill” display/tray packer suitable to handle both cartons and displays/trays. Its main feature is the variety of products that it can pack at high speeds. The machine is constructed with the following:

    • Single or double inclined flat blank magazine
    • Picking system with articulated arm
    • Lateral side flap gluing with hot melt injection device
    • Forming unit
    • Positive carton handling
    • Filling system through an integrated “pick & place” design
    • Top flap gluing with hot melt injection device
    • Lid module
    • Closing station
    • Reject station

    TECHNICAL DATA

    • Maximum Flat Blank: 750 x 750 mm
    • Speed: Up to 120 cpm
    • Gross Weight: 14,000 kg
    • Compressed Air: 400 Nl/min
    • Installed Power: 29 Kw

  • Cartons
  • Doypacks
  • Pouches
  • Tubs
  • Cans
  • Tins
  • Tubes
  • Bags
  • Coffee capsules
  • Stock cubes
  • Tabs
  • Stick packs
  • Get in touch today for a consultation.